The Universal Double-Bar Safety Gates (UDG) are polyurethane, self-closing safety gates. These industrial safety gates are used to prevent falls and protect employees from vulnerable openings at the tops of vertical ladders and elevated platforms. The self-closing swing gate meets and exceeds all fall protection standards, including US OSHA 1910.29 (Walking-Working Surfaces Standard), EN ISO 14122, and ABS Standard 201 Section 4.8.
Toeboard Links (T5) are designed to easily enclose unwanted openings, gaps, and penetrations found in walking surface areas. Intrepid Toeboard Links are designed to encircle piping of all sizes found in and around grating and deck plate. The Intrepid Toeboard Links are manufactured from our rigid, noncorrosive polyurethane, making the T5 resistant to outdoor exposure and harsh environments. Each link effortlessly bolts to the surface from the topside of the grating; therefore, no welding or scaffolding is required. The T5’s snap-in design is not only easy to install but is also easy to unbolt and remove in case a rework is required.
High 5® Hooks strengthen your current cable management and housekeeping activities. They’re an easy way to elevate tripping hazards from walking-working surfaces. H5H are used to effectively suspend cords, hoses, welding leads, cables, and other equipment for oil and gas, petrochemical, construction, shipyards, and other industrial environments.
The Pedestrian Gate (PG) is a polyurethane and PVC, gravity-closing swing gate used for ground applications where people are to be separated from equipment and/or machinery. The lightweight warehouse gate provides safe access between segregated areas of operation. The Pedestrian Safety Gate is an easy-to-install passive gate for industrial and commercial settings. The Pedestrian Gate is designed for indoor use.
Grating Collars (GPC), also known as Pipe Penetration Collars, are designed to easily enclose unwanted openings, gaps and penetrations found in walking-working surface areas. The GPC-6 is designed to encircle 6” openings on grating and deck plate. Each collar effortlessly bolts to the surface from the topside of the grating, using either a J-bolt or L-bolt; therefore, no welding or scaffolding is required. The GPCs bolt-in design is not only easy to install but is also easy to unbolt and remove in case a rework is required.