Allentown Tables

Cabinet and Hardware 1 1/4" thick wood cabinet. Two sturdy, 6x2" solid hardwood cross beams tie the cabinet sides together. All interior connections are secured by steel hanger brackets with pre-threaded steel receivers recessed into the cabinet. The suede finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 7' and 8' sizes Leg Style Tapered, solid hardwood legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and re-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with fringe and tie-back style tassels. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Lexington Pool Table in Mahogany Finish This is a richly stained Mahogany Pool Table with elegantly hand carved Ball and Claw Legs Cabinet and Hardware Artisan crafted from American Maple and select hardwoods with a rich Walnut finish. All interior connections are secured by wood hanger brackets with pre-threaded steel receivers recessed into the cabinet. The Deep Walnut finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 7' and 8' sizes Leg Style Hand carved, solid ball and claw legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and pre-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Genuine leather pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with a shield. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. BASIC ACCESSORY KIT INCLUDED.PLEASE VISIT OUR ACCESSORY PAGE FOR MORE ACCESSORY OPTIONS.

Cabinet and Hardware Artisan crafted from American Maple and select hardwoods with a rich Walnut finish. All interior connections are secured by wood hanger brackets with pre-threaded steel receivers recessed into the cabinet. The Deep Walnut finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 7' and 8' sizes Leg Style Hand carved, solid ball and claw legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and pre-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Genuine leather pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with a shield. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber.

Eclipse Pool Table by American Heritage Cabinet and Hardware 1 1/4" thick Walnut cabinet. Double cross beams tie the cabinet sides together. All interior connections are secured by wood hanger brackets with pre-threaded steel receivers recessed into the cabinet. The walnut finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 7' and 8' sizes Leg Style Hand carved, solid hardwood ram horn designed legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and pre-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Genuine black leather tassled pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with fringe and tie-back style tassels. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions 5" wide-profile top rails are solid hardwood! A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Cabinet and Hardware 1 1/4" thick Walnut cabinet. Double cross beams tie the cabinet sides together. All interior connections are secured by wood hanger brackets with pre-threaded steel receivers recessed into the cabinet. The walnut finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 7' and 8' sizes Leg Style Hand carved, solid hardwood Ball and Claw designed legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and pre-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Genuine Matching leather Shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with fringe and tie-back style tassels. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions 5" wide-profile top rails are solid hardwood! A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Legacy Rylee Pool Table Cabinet and Hardware 1.25" thick solid arched hardwood cabinet. Hardwoods are used in the cabinets,legs,top-rails,blinds and cross-beam slate support. Available in three finishes: Port, Black Cherry and Nutmeg. Available in 7' and 8' sizes Leg Style Hand carved, solid hardwood ball and claw legs attach to the cabinet with the patented Perfect Corner. This design guarantees each table assembly will be perfectly square. This design provides the strongest cabinet corner support of any billiard brand in the industry. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh shield pocket. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Cabinet and Hardware 1.25" thick solid wood cabinet. Fully routered, hardwood notched panel cabinetwork.Using Legacy Billiards patented perfect corner construction. Available in three finishes; Black Cherry, Nutmeg and Port. Available in 7' and 8' Leg Style Hand carved, Ram Horn legs attach to the cabinet with a patented all wood corner construction. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" oversized slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Pro-style rails with hand inlaid mother of pearl sites.Rails are secured to the slate by Legacy’s Power Lock. An oversized t-nut fastener is securely held into the rail by a solid hardwood core to tightly hold the extreme torque of the rail bolts onto the table. K-66 profile cushions are natural gum rubber.

Cabinet and Hardware 1.25" thick solid hardwood cabinet. Hardwoods are used in the cabinets,legs,top-rails,blinds and cross-beam slate support. Available in three finishes: Port, Black Cherry and Nutmeg.(Traditional Oak has been discontinued) Available in 7' and 8' sizes Leg Style Hand carved, solid hardwood tapered legs attach to the cabinet with the patented Perfect Corner. This design guarantees each table assembly will be perfectly square. This design provides the strongest cabinet corner support of any billiard brand in the industry. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh shield pocket. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Cabinet and Hardware 1” Wood cabinet with Maple Veneer. This billiard table offers a unique, Southwestern look with its beautifully detailed design. Available in Onyx Finish. Available in 8' Leg Style Tapered legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and re-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Durahyde Shield pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Diamond mother of pearl sites. Fortress Power Rail (patent pending) with its 3/4" laminated T-nut securely attach the rails to the table

Cabinet and Hardware 1” Wood cabinet with Maple Veneer. Sturdy and durable in construction, the sleek and streamlined Stallion Pool Table keeps the focus on the purity of the game through it's understated design and excellent playability. It's affordable price makes it a top-level choice for a budget-minded game room design project..Available in Port Finish. Available in 8' Leg Style Spoon legs attach to the cabinet with a unique solid steel bracket system. Steel brackets are fastened to the cabinet and legs with steel bolts and re-threaded receivers are recessed into the cabinet. This system provides optimum strength and rigidity. Pockets and Slate Durahyde Shield pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Diamond mother of pearl sites. Fortress Power Rail (patent pending) with its 3/4" laminated T-nut securely attach the rails to the table

Omega Pool Table by American Heritage 3" wood laminate beams 2" x 4 3/4" Outside dimensions 55" x 99" Playfield 44" x 88", 95' x 51" x 1" slate Play surface height 31" Durable formica construction Chrome accents Full profile K66 master speed cushions Available in 8' only

ALLOY BALL RETURN OPTION Cabinet and Hardware Black melamine with chrome accents finish this table nicely. Full length steel center beams run the table with 4 cross beams to carry the weight of the 1" slate. 4 player score keeper. Available in 8' and 9' sizes Leg Style Built in levelers make installation simple and accurate. Steel brackets are bolted to the slate bed, increasing strength and rigidity. Pockets and Slate Chrome corner accents decorate the vinyl pockets. This table has an optional alloy ball return system. The ball box is prefect for storage. This table uses 3 piece,1" slate for the 8' 9' table. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. 1" Brazilian slate Sturdy melamine cabinet Chrome finish leg levelers High pressure laminate rails Chrome cabinet accents Laminated cross beams Alloy rail ball return system Available in 8 or 9 foot sizes

Cabinet and Hardware 1.25" thick solid wood cabinet.Featuring Legacy Billiards' patented Perfect Corner.The Ella features and arched cabinet for a sleek, contemporary look. The smooth, polished finish is available in four stains; Onyx, Black Cherry, Nutmeg and Port. Available in 8' and 9' sizes Leg Style Curved post legs. The post leg construction is designed so the panels are inserted into the legs. This design allows the weight to be transferred directly to the legs and not rely on hardware to carry the weight of the slate. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Arched side blinds with white embedded diamond pearl sites. Fortress Power Rail with its ¾” laminated T-nut securely attach the rails to the table. BCA Approved K-66 profile cushions with natural gum rubber

Cabinet and Hardware 1.25" thick solid hardwood cabinet.Featuring Legacy Billiards' perfect corner. Solid hardwoods are used in the cabinets,legs,top-rails,blinds and cross-beam slate support. Available in three finishes: Port, Black Cherry and Nutmeg. Available in 8' and 9' sizes Leg Style Hand carved, solid hardwood Scroll legs attach to the cabinet with the patented Perfect Corner. This design guarantees each table assembly will be perfectly square. This design provides the strongest cabinet corner support of any billiard brand in the industry. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Cabinet and Hardware 1.25" thick solid hardwood cabinet.Featuring Legacy Billiards' patented Perfect Corner. Hardwoods are used in the cabinets,legs,top-rails,blinds and cross-beam slate support. Available in three finishes: Port, Black Cherry and Nutmeg. Available in 8' and 9' sizes Leg Style Hand carved, solid hardwood ball and claw legs attach to the cabinet with the patented Perfect Corner. This design guarantees each table assembly will be perfectly square. This design provides the strongest cabinet corner support of any billiard brand in the industry. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh shield. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response

Cabinet and Hardware 1.25" thick solid hardwood cabinet.Featuring Legacy Billiards' patented Perfect Corner. Solid Hardwood are used in the cabinets,legs,top-rails,blinds and cross-beam slate support. Available in three finishes: Port, Black Cherry and Nutmeg and 8' and 9' sizes Leg Style Hand carved, solid hardwood tapered legs attach to the cabinet with the patented Perfect Corner. This design guarantees each table assembly will be perfectly square. This design provides the strongest cabinet corner support of any billiard brand in the industry. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh shield pocket. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Cabinet and Hardware 1.25" thick solid wood cabinet. Fully routered, hardwood notched panel cabinetwork. Available in four finishes; Old English, Black Cherry, Nutmeg and Port. Available in 8' and 9' sizes Leg Style Hand carved, oversized fluted legs attach to the cabinet with a patented all wood corner construction. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" oversized slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Pro-style rails with hand inlaid mother of pearl sites.Rails are secured to the slate by Legacy’s Power Lock. An oversized t-nut fastener is securely held into the rail by a solid hardwood core to tightly hold the extreme torque of the rail bolts onto the table. K-66 profile cushions are natural gum rubber.

Cabinet and Hardware 1 1/4" thick wood cabinet. Quad beam frame construction designed to create a dead flat playing surface by unitizing the frame and cabinet and distributing the weight evenly throughout the table. The Vintage Oak finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 8' Leg Style These are massive ball and claw legs that give the table a very unique look. The legs are hand carved and attach to the cabinet via a unique mortise and tenon joint. This provides for uncompromising strength and rigidity. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this Leather shield pocket. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions 6" wide-profile top rails are solid Wood! A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions are 100% natural gum rubber. Solid hardwood Sub-rails are designed for optimal ball response.

Cabinet and Hardware 1 1/4" thick wood cabinet. Quad beam frame construction designed to create a dead flat playing surface by unitizing the frame and cabinet and distributing the weight evenly throughout the table. The suede finish is hand rubbed, sanded, sealed and a pre-catalyzed lacquer is applied for a deep, long lasting sheen and beauty. Available in 8' and 9' sizes Leg Style Hand carved, solid hardwood legs with ram horn design attach to the cabinet with recessed mortise and tenon wood cabinet joinery. Pockets and Slate Genuine leather with Loop and Tassel pockets wrap around a die cast iron core for beauty and durability... Allentown Tables always uses 3 piece, 1" oversized slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions! A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response

Legacy Landon II Pool Table Legacy Billiards redefines pool table style with the 2013 Landon II pool table. Built of solid wood with a fine furniture finish, the Landon II is inspired by the craftsman era of fine wood working. The Landon II is infused with special details ranging from the 6 inch closed rail with embedded real mother of pearl sites to the custom routered details of the side panels. Landon II boasts a 1 inch think slate base and a lifetime warranty. Seasoned players will know this table is made for professional play.

Cabinet and Hardware 1.25" thick solid wood cabinet.Featuring Legacy Billiards patented Perfect Corner. Fully routered, hardwood notched panel cabinetwork. Available in four finishes; Old English, Black Cherry, Nutmeg and Port. Available in 8' Leg Style Contoured legs and masculine routered details. Fluted legs attach to the cabinet with a patented all wood corner construction. Pockets and Slate Golden tassels on leather pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Contoured and routered blinds.Pro-style rails with hand inlaid mother of pearl sites.Rails are secured to the slate by Legacy’s Power Lock. An oversized t-nut fastener is securely held into the rail by a solid hardwood core to tightly hold the extreme torque of the rail bolts onto the table. K-66 profile cushions are natural gum rubber.

Cabinet and Hardware 1.25" thick solid wood cabinet.Featuring Legacy Billiards' patented Perfect Corner. Fully routered, hardwood notched panel cabinetwork. Available in four finishes; Old English, Black Cherry, Nutmeg and Port. Available in 8' Leg Style Hand carved, fluted legs attach to the cabinet with a patented all wood corner construction. Pockets and Slate Beautiful loop and tassel pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Pro-style rails with hand inlaid mother of pearl sites.Rails are secured to the slate by Legacy’s Power Lock. An oversized t-nut fastener is securely held into the rail by a solid hardwood core to tightly hold the extreme torque of the rail bolts onto the table. K-66 profile cushions are natural gum rubber.

Cabinet and Hardware 1.25" thick solid wood cabinet.Featuring Legacy Billiards' Perfect Corner. Fully routered, hardwood notched panel cabinetwork. Available in four finishes; Old English, Black Cherry, Nutmeg and Port. Available in 8' Leg Style Hand –turned leg details, fluted legs attach to the cabinet with a patented all wood corner construction. Pockets and Slate Beautiful loop and tassel pockets wrap around a die cast iron core for beauty and durability. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions Pro-style rails with hand inlaid mother of pearl sites.Rails are secured to the slate by Legacy’s Power Lock. An oversized t-nut fastener is securely held into the rail by a solid hardwood core to tightly hold the extreme torque of the rail bolts onto the table. K-66 profile cushions are natural gum rubber.

Cabinet and Hardware Beautiful Maple Hardwood construction with a luxurious Navajo finish. The Elegance features quad beam frame construction. The double center beam and cross beam construction is designed to create a level playing surface by unitizing the frame and cabinet and distributing the weight evenly throughout the table. Available in 8' Leg Style Hand carved, solid hardwood legs attach to the cabinet with a recessed mortise and tenon wood cabinet joinery. The solid one piece post legs are intricately carved to provide and elegant look. This system provides optimum strength and rigidity. Pockets and Slate Genuine leather fringe loop & tassle pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with decorative fringe. Allentown Tables always uses 3 piece, 1" backed slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Decorative maple veneer hardwood rails with Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Ella II pool table is styled with curved post legs, an arched cabinet and arched side blinds, all showcasing a smooth polished finish on solid hardwood. Ella II billiard table is modern yet elegant for a contemporary look. Ella II encompasses the pocket with a solid wood rail with white embedded diamond pearl sites. This beautiful pool table is for the billiard room that is looking for a modern panache. Ella II is available in 8 ft and 9 ft lengths. And to keep your game room as sleek as the Ella II, we recommend purchasing the Perfect Drawer for perfect hidden storage for all your billiard room accessories.

ANTIQUE STYLING Cabinet and Hardware 1 1/2" thick wood cabinet. The Britton features quad beam frame construction. The double center beam and cross beam construction is designed to create a level playing surface by unitizing the frame and cabinet and distributing the weight evenly throughout the table. The rich chestnut stain is a multi-stage process completed by hand to give it true and authentic feel. Available in 8' Leg Style Hand carved, solid hardwood legs attach to the cabinet with a recessed mortise and tenon wood cabinet joinery. The solid one piece post legs are intricately carved to provide and elegant look. This system provides optimum strength and rigidity. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather mesh pocket decorated with decorative shield. Allentown Tables always uses 3 piece, 1" slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions with natural gum rubber. Solid hardwood sub-rails are designed for optimal ball response.

Cabinet and Hardware Artisan crafted from American Maple and select hardwoods with a Chardonnay finish. The double center beam and cross beam construction is designed to create a level playing surface by unitizing the frame and cabinet and distributing the weight evenly throughout the table Available in 8' Leg Style Decorative solid hardwood legs attach to the cabinet with a recessed mortise and tenon wood cabinet joinery. This system provides optimum strength and rigidity. Pockets and Slate Genuine leather shielded pockets wrap around a die cast iron core for beauty and durability. Balls are held in this leather shield pockets. Allentown Tables always uses 3 piece, 1" oversized slate. Diamond honed and perfectly matched to provide a consistent and absolutely level playing surface. Rails and Cushions A 2 piece t-nut fastening plate secures rails and aprons to the slate bed for precision fitting. Decorative Rosewood rails with Mother of Pearl precision inlaid diamond sites are a nice touch. BCA Approved K-66 profile cushions are natural gum rubber. Assembly, leveling and felt installation is required on all of our tables.

The Grand Deluxe is one of the oldest shuffleboard tables around, dating back to the 1930's. Still built with the same attention to detail that you find in most antique shuffleboard tables, the Grand Deluxe will stand out in any home game room. The cabinet is constructed of poplar and maple with mahogany bowed ends. The brass screws and solid brass connecting plates complete the finishing details of this beautiful shuffleboard.

Add something special to your game room with this uniquely designed shuffleboard. Available in a beautiful Red Oak, this shuffleboard will fit into any decor. The playfield is made of hard rock maple with our specially formulated synthetic lacquer finish. The cabinet is hand crafted from curly maple and solid wood set atop domestic veneer core plywood for strength and stability. It is finished off with beautifully design center connectors,leather padding, and maple inlay on the legs and cabinet. Get the custom shuffleboard you always dreamed of with a wide selection of stain and leather padding colors. Our professional delivery and in home assembly is included.

The Chicago: This handcrafted shuffleboard is styled after one of the most sought after antiques. Using only the finest raw materials, this shuffleboard is assembled with the knowledge and experience of more than 60 years. The playfield is manufactured using both tradition and innovation in the joining and finishing process. Our Professional delivery and assembly is included

The Ambassador design was premiered in the 2000 North American Shuffleboard Championships in Reno, Nevada. This model stands out due to its clean design; however, while the professional players gave their input for the development of this table, it is not necessary to be a pro to enjoy and appreciate its quality.

The Classic: This very popular model is found in bars across America. Its rugged construction and vintage styling is perfect for any home game room, billiard hall, or local bar. You can expect to enjoy a lifetime of fun and competitive play with the Classic shuffleboard table. As with all Venture Shuffleboard tables the Classic is 100% made in America. This model is also available in a coin-op version, please contact us for details.

The 9’ Grand Deluxe Bankshot Shuffleboard Table uses three types of wood, maple, mahogany, and poplar, for authentic appearance and natural beauty. A 1 3/4" thick playing surface is comprised of 100 % kiln-dried hard rock maple, coated with Venture's exclusive hard clear synthetic lacquer. The 9" Grand Deluxe Cushion Shuffleboard Table includes all of the aesthetic features of the Grand Deluxe line and has been modified with cushions and a 24" wide playfield, creates another dimension to the game of shuffleboard. Perfect for the home that doesn't have the space for a traditional long board.

The Grand Deluxe Sport is Venture's version of a crossover. Built on the sturdy, uni-body frame of the Challenger shuffleboard, with slightly scaled down dimensions, but with our newest assembly technics utilizing a hidden fastener system for added strength. Venture's newest shuffleboard is detailed with our oldest and most recognizable styling of the Grand Deluxe. Constructed of Poplar and Maple, this table is hand finished in three colors:Shown in the Dark Walnut finish.

Tailored and trim, the Elite 12 ft Shuffleboard is the playroom's next addition. This shuffleboard looks right in the best of gamerooms. The Elite is designed with long lean lines, wood panels and a sturdy 2.5 inch playfield made from North American grown poplar. The playfield top is sealed with 1/4 inch polymer resin for a lasting smooth surface. Elite 12 ft Shuffleboard's glide-out Perfect Drawer stores all your shuffleboard accessories conveniently under the table. Legacy Shuffleboard playfields have a lifetime warranty. Legacy recommends purchasing the optional light kit for two overhead lights and the electronic score unit to complete your shuffleboard experience.

Classic 9 ft Shuffleboard is ahead of it's competitors in quality construction and value. This shuffleboard is designed for the player with compact space and unlimited family fun. The shuffleboard features a 1.5 inch thick x 16 inch wide Classic playfield of birch veneer over a MDF foundation with the added strength of a 1/8" polymer resin. The playing surface is smooth and fast. Legacy's special playfield clear sealant protects the Classic 9 ft shuffleboard table from warping. And for your shuffleboard accessory storage, Legacy has added the glide out Perfect Drawer mounted under the table. Legacy provides a lifetime warranty and free shipping for your shuffleboard. Shuffleboard includes one can of wax and pucks.

Get ready for countless hours of fun and excitement with the Sterling 14 ft Shuffleboard. For storage of your pucks, brushes, and other accessories, the Sterling Shuffleboard table provides the Perfect Drawer, a glide in storage drawer mounted under the table. The shuffleboard playing field is 3 inches thick and is made with North American plantation grown yellow poplar. The 13 foot playfield boasts 4 scoring zones for even more action. This shuffleboard blows away the competition in quality and durablity and is backed with Legacy's lifetime warranty. Legacy recommends purchasing the optional light kit for 2 overhead lights and the score unit. Sterling Shuffleboard is pre-wired to add both.

The Premier Limited Edition shuffleboard table. • Solid hardwood furniture cradle stained in Mahogany • Cradle features unified horsecollar ends • Stained, hardwood applique detailing on the cradle and leg panels • 1 3/4" Canadian Maple playfield - same as professional tables • True butcher-block edge glued bed (not plank style) • Bed finished with 10 coats of polyurethane lacquer to create a smooth, glossy, fast surface • 2 Sets of climatic adjusters for a flat and true professional play • Storage shelf on both ends • Tan Carpeted Walls & Gutters • Hardwood Abacus Scorers • Leg Levelers • Traditional indoor 1-2-3 scoring with outlined block numbering • Set of eight, 2" basic playing weights (4 blue & 4 red) • Can of speed bead wax Playfield width 15" Finished Cabinet width 25" We Recommend our Professional in home assembly

Premier Espresso Shuffleboard The Premier Limited Edition shuffleboard table. • Solid hardwood furniture cradle stained in an Espresso (dark brown) and natural maple • Cradle features unified horsecollar ends • Stained, hardwood applique detailing on the cradle and leg panels • 1 3/4" Canadian Maple playfield - same as professional tables • True butcher-block edge glued bed (not plank style) • Bed finished with 10 coats of polyurethane lacquer to create a smooth, glossy, fast surface • 2 Sets of climatic adjusters for a flat and true professional play • Storage shelf on both ends • Tan Carpeted Walls & Gutters • Hardwood Abacus Scorers • Leg Levelers • Traditional indoor 1-2-3 scoring with outlined block numbering • Set of eight, 2" basic playing weights (4 blue & 4 red) • Can of speed bead wax Playfield width 15" Finished Cabinet width 25" We Recommend our Professional in home assembly

Venture's Challenger shuffleboard is built on a sturdy, uni-body frame with slightly scaled down dimensions from our largest tables. Constructed on a solid plywood base and finished using a high pressure laminate, the Challenger is sturdy and durable for any home setting and it's clean lines compliment any home's style. The Challenger is offered in 2 finishes: Fusion Maple and Empire Mahogany, both pictured above.

Enhance your game room experience with the excitement of a time-honored tradition: shuffleboard. Experience the challenging and addictive play of the classic game with the Heritage Shuffleboard. With built in adjustable storage shelves inside the legs, it's easy to store your accessories safely and securely. With a sleek, modern design, the Heritage Shuffleboard is an excellent to addition to any game room.

Shuffleboard lights will enhance your shuffleboard experience. Legacy's shuffleboard Light Kit features an onyx finish wood canopy displaying the Legacy logo. Shuffleboard light kit easily attaches to the cabinet of Legacy's Classic, Elite and Sterling or Heritage shuffleboard table. Quickly add some ambiance to your shuffleboard play with these high-quality shuffleboard lights. Lights are mounted 30 inches above playfield and include fluorescent bulbs.

Keeping score of your shuffleboard game has never been easier with this electronic scoring unit. The ability to attach the unit to the cabinet of your shuffleboard will leave you free to focus on the game. This scoring unit guarantees hours of amusement with a large screen to display who is the greatest player. Legacy Shuffleboard Score Unit is designed to be installed in the center on the side frame of the Classic, Sterling and Elite shuffleboards. Score Unit ships with all neccessary components and arrives semi- assembled. Score Unit include easy to follow installation instruction

No shuffleboard is complete without bowling pins! Enhance your game by adding these ten sublime bowling pins. With the added pinsetter, you'll never have worry with setting your pins up manually again. Begin a game with your friends and start creating some new memories.

Properly maintaining your play surface with Shuffleboard Wax is the most important part of playing the game. Black Ice Shuffleboard Wax is a powder made with tiny silicone balls. Once applied, the shuffleboard puck travels on the wax as it goes down the surface. Simply add a light coat of Shuffleboard Wax to your table's playing surface to keep your game top-notch. NOTE: Shuffleboard wax beads must be used to in order for the pucks slide down the playing surface. Never slide a puck with out applying wax beads to the surface.

ELECTRA 7ft Table Hockey w/Interactive Rail Lighting - HT27 Interactive Lighting - Red white and blue trailing lights bring the table to life. When the game is "on" these lights track the score and remain white as long as the score remains even. If the red team takes a lead the LEDs flash red and stay red indicating who is in the lead. If the blue team strikes back with a goal the LEDs flash blue and then return to white signaling the score is even again. If the blue team takes the lead the blue LEDs flash and remain on until the score changes.

ENFORCER 7ft Table Hockey w/Extreme Hockey - HT28. When you think of playing hockey in the arcade - the Enforcer is the table you will remember. Full aluminum rails for the quickest rebound-dual blower motors for real "air" hockey puck speed and extra large framing make this table the most well built table in its class. The Extreme Hockey blind adds another layer of fun to the game with easy removal for standard play. Extreme Hockey is a simple yet slick way to speed up standard table hockey. An adjustable visual barrier hides your shots from your opponent until the last second making it a faster and more challenging game. The lower the Extreme blind is positioned the less time you have to react and the faster the game plays.

MONARCH AIR HOCKEY TABLE The Monarch “AeroMaxx Series” Air-Powered Hockey Table’s design is as sleek and smooth as the puck that will glide over it. This table features a unique overhead arch with a two-player electronic scorer. The cherry-finished cabinet has silver caps and trim, supplementary manual scorers on each side of the deep playing surface, and a screenprinted starburst design.

• Electrifying graphics on this 8' table • Overhead electronic scoring bridge with extra bright, extra large digital numbers • More blacklight surface than any other table...bridge, rails, complete corners and light assembly • Oversized aluminum rail prevents puck from flying off the table • Internal puck drop system, with hinged panel for tool free access • Tournament size goals promote super speed action • Industrial rated blower provides superior speed and performance over any competitive table in the industry • Easy to clean formica playfield with long-term wearguard finish • Centerline goalie box enhances premium playfield performance • Cabinet grade plywood construction

This is a commercial quality table with Arcade styling features and heavy-duty construction. Huge size 7.5 foot Cyclone Air Hockey Table. One of the best quality tables on the market. Professional design for a hassle-free play experience! Features: • Perspex acrylic playing surface, not MDF for superior puck action • Heavy duty cyclone blower for total-surface air flow • Solid aluminium top rail • Apron corners are ABS • Moulded solid leg made of ABS • Unique anti-flyout side rail design • Arcade style overhead digital score board, plays sound and reads the score • Overhead scoring tube made from Aluminium • Extruded aluminum top rail for arcade speed and lightning-fast rebound • Heavy duty construction for fast action and long-lasting durability • Includes: 8 - 3" Easy-gliding pucks, 4 - Heavy duty rubber mallets and a bottle of polish agent Dimensions: 7.5'L x 4.5'W x 42"H / 71"H to overhead scoring unit Playfield Dimensions: 6.5'L x 3.44'W Apron Height: 12" Weight: 230 pounds

The Allentown Pro adds excitement to an already exciting game. • Easily assembled in homes • Fast pace puck movement • Playfield 4.75mm MDF over 9mm plywood • Cabinet is 15mm plywood in black • Legs are 12mm MDF with black finish • 6" Chrome leg levelers • Industrial grade blower • Manual abacus scoring lays flush • Can accomodate an optional ping pong conversion top • Includes 4 - 3" red pucks & mallets • Sturdy construction for years of enjoyment! Playfield Dimensions: 88 3/8"L x 40 3/8"W Overall Dimensions: 98"L x 50"W x 32"H Weight: 335 pounds

This is a commercial quality table with Arcade styling features and heavy-duty construction. Huge size 8 foot Air Explorer Table Air Hockey . One of the best quality tables on the market. Professional design for a hassle-free play experience! Features: • Perspex acrylic playing surface, not MDF for superior puck action • Heavy duty blower for total-surface air flow • Solid aluminium top rail • Apron corners are ABS • Molded solid leg made of ABS • Unique anti-flyout side rail design • Arcade style overhead digital score board, plays sound and reads the score • Overhead scoring tube made from Aluminium • Extruded aluminum top rail for arcade speed and lightning-fast rebound • Multi-colored LED lights around rails • Plastic safety shield in center of table prevents puck fly off • Heavy duty construction for fast action and long-lasting durability • Includes: 10 - 3" Easy-gliding pucks & 4 - Heavy duty rubber mallets • Optional coin-op mechanism up to 4 coins or use tokens (additional cost) Dimensions: 91"L x 53"W x 34.25"H / 76"H to overhead scoring unit Playfield Dimensions: 81"L x 39.25"W Apron Height: 17" Weight: 330 pounds

Introduce the excitement of foosball into your home with the Premier Indoor Foosball Table. This soccer game table is built with style and comfort in mind. Large, solid, rubber grips allow for comfortable handling during play, and the cabinet is a smart looking light butcher block finish that is sure to blend into your game room's d cor. The Premier Indoor Foosball Table will be a hit with your family and friends. Features: Foosball table Light butcher block MDF Side walls and playfield Large, solid, rubber grips Double chrome rods 14'' Body

Get your game on with our Classic Foosball Table. This fashionably designed game table complements any decor. The table is set in a beautiful Espresso cabinet accented with detailed trimming and professional hardwood handles. Parquet playing field Easy-glide ball bearings Striped rugby competitors Includes soccer balls Stainless steel rods Players are counter balanced Adjustable leg levelers 3/4" thick sidewalls Some assembly required; view instructions

Introduce the excitement of foosball into your home with the Premier Indoor Foosball Table. This soccer game table is built with style and comfort in mind. Large, solid, rubber grips allow for comfortable handling during play, and the cabinet is a smart looking light butcher block finish that is sure to blend into your game room's d cor. The Premier Indoor Foosball Table will be a hit with your family and friends. Features: Foosball table Light butcher block MDF Side walls and playfield Large, solid, rubber grips Double chrome rods 14'' Body

Sleek and transitional mixing traditional style and materials with modern designs and accents, the Atlantis Foosball Table from American Heritage will look great in any setting. Place this foosball table in a classic billiard parlor with wood floors, traditional pool hall decorations and other timeless features, or feature it in a contemporary game room with shuffleboard tables, arcade games and other modern amusements. Regardless of the game room's theme, this American Heritage model will stand out with striking chrome accents, handsome maple veneer and an exquisite cherry brown finish.

The Tornado brand is synonymous with tournament style foosball and creating high-quality foosball tables over the past 40 years. Tornado tables are the official tables of the sport. They were born in 1970 by the Valley® company with an engineered table that was designed for commercial vending use in bars and foosball halls across the United States. The Tornado product is known for creating an American style of foosball that is based on power and control. The hard and level table surface, high-quality foosball men that allows for maximum control, and other high-quality parts set this brand apart from the rest. The tables allow for a fast-paced game while being able to maintain a never before seen level of control to set up shots that blow away new people to the sport. All of these factors are the reason that they have become the official foosball table of tournaments around the United States.

A fine and solid game table for some serious poker fun. Includes 4 matching sturdy and comfortable chairs, solid pedestal base and an excellent game table surface. Available in 5 stains to match and Décor

3 in 1 Combination Table: Converts instantly from a dining table to an 8 position poker table with the flip of the top. Remove the top to reveal the Bumper Pool option.Includes 4 Swivel Oak Poker Chairs with rolling casters. • 48" Octagon • Oak Finish • Dining Table • Poker Table • Bumper Pool Table • Poker side: 8 built in drink holders with 8 sections to hold your chips • Retractable leather pockets • Genuine Black Leather Poker top • Top and base of selected hardwoods and veneers • Solid wood foot pedestal • Includes accessories: Balls & Sticks • Assembly required for table and chairs Available in 54"

60" Poker Table with optional dining top (sold separately). Converts instantly from a 10 person poker table to a dining table. • 60" Round • Oak Finish • Top and base of selected hardwoods and veneers • Designer pedestal with solid wood ball & claw foot • Includes 2 removable foam cushioned felt poker tops in Green & Red • Padded black vinyl outer rail accentuated by brass accents / nail heads • Stainless steel drink holders • Assembly Required • 4 Oak Poker Chairs included Dimensions: 60"D x 32"H Weight: 175 pounds

3 in 1 Combination Table: Converts instantly from a dining table to an 8 position poker table with the flip of the top. Remove the top to reveal the Bumper Pool option. • 54" Octagon • • Dark Antique Walnut Finish • • Dining Table • • Poker Table • • Bumper Pool Table • • Poker side: 8 built in drink holders with 8 sections to hold your chips • • Retractable pockets • • Black Leather Poker top • • Top and base of selected hardwoods and veneers • • Solid wood "rams horn" foot pedestal • • Includes accessories: Balls & Sticks • • Assembly required for table and chairs 4 Matching Chairs included in this price

Hustler 2-N-1 Game Table Collection The Hustler 2-in-1, 60" Game Table Set comes in a rich Suede finish and features a beautiful dining surface that flips into a poker top with a spectacular padded perimeter. Decorative roping trim covers the top and four nicely appointed Clarisa Game Chairs are included. This Luxury Table and 4 Chairs furniture set will may a great addition to your Gameroom. Hustler Game Table Features: Hardwood construction with Suede finish 60" Gathering Table Flip-Top Dining & game playing surface Beautiful curved base with Ball & Claw legs Assembly required Warranty: 1 year Hustler Game Table Dimensions: Table dimensions: 60"W x 60" D x 30 1/2" H Chair Features: Finished in Suede Black Leather Upholstery Includes adjustable-action seating Smooth bearing casters

Classic Poker Table Game Set $2,399.00 Be ready for a game of cards with friends, a challenging board game with the family, or a nice dinner with someone special. This 48"" octagonal table includes a flip-top with one side having drink holders and chip trays and removable rubber inserts to protect from spills. The other side? A beautiful dining top! This innovative design is just one of the many ways Legacy surpasses the competition. The Classic game set comes with 4 matching chairs with black faux leather that swivel, tilt, and adjust in height. Available in Black Onyx,Oak,Black Cherry,Nutmeg and Port finishes

Hold Em 2 in 1 Table ONLY $1,999.00 Be ready to turn your dinner party into a competitive card game at a moments notice. With padded arm rests along with a wooden chip and drink area, this elegant 88"x 46" flip top table is ideal for any get together for decades to come Dimensions: 88" x 46" Available in Port, Onyx, Black Cherry and Nutmeg Matching Classic Chairs available-sold separately

Matching Classic Chairs for Classic Poker Table 2 in 1 set and Hold Em 2 in 1 Table

Renegade Game Set $3,099.00 Renegade Game Set includes a 54 inch, octagonal flip top poker or dining table and 4 matching black pearl finish chairs. The poker table is enhanced with a laser etched logo on the dining side. By flipping the top over the table converts to a game and poker table complete with lined drink holders, chip holders and a soft logo embossed leather card surface. Game table includes a sturdy base with laser etched flames and silver studs surrounding the table apron. Black upholstered chairs will make any card playing guest feel right at home; chairs roll, swivel, tilt and height adjust. The matching chairs swivel, tilt, lift, and are embossed with the Renegade logo on the seat and our Skull & Flames on all seat backs. Minimum assembly required. All Renegade furniture is backed by the Legacy Billiards one year furniture warranty.

This amazing Calcutta Bar Package comes with: 96" BAR FINISHED IN A BEAUTIFUL PEPPERCORN STAIN 68" MATCHING MIRROR CABINET 3 MATCHING AUBURN BAR STOOLS

This Beautifully designed Bar package includes: 77" AUGUSTA BAR IN SUEDE STAIN 54" MATCHING MIRROR CABINET 2 MATCHING AUBURN BAR STOOLS

This Beautiful Bar Package comes loaded with all the necessary pieces of furniture you will need to complete your Game room.

This 74" Bar comes finished in Antique Black with decorative canning and a two-tone Top.The interior provides plenty of storage shelving and a Corian-style cutting surface.

Sterling Bar is pictured with 30" Return which can be used on either side of the Bar.An additional Return can be purchased to make the Bar a 'U' shape. Add a touch of class to your home with the gorgeous Sterling 72" Bar. Astound your party as you produce beverages using the two dry sinks, stemware holders, and cutting board. The Sterling 72" Bar provides ample space with its storage drawers and lockable cabinet. Bar includes a full length brass finish foot rail. The 30" Return turns this Bar into a perfect 'L' shape adding extra seating space.The Return can be assembled on either side of the Bar and includes the foot rail to match.

Sterling Bar is pictured with 30" Return which can be used on either side of the Bar.An additional Return can be purchased to make the Bar a 'U' shape. The extended length, Sterling 92" Bar speaks of confidence. The long, clean lines with raised panel features is a great addition to the party room, family room or game room. Sterling 92' Bar comfortably seats six barstools. Take advantage of the 92 inch room features features including a wine chiller, drawers, storage cabinet, adjustable shelves and a storage cavity large enough for a 25 x 33 inch refrigerator. With its stunning brushed metal hardware foot rail and door pulls, your guests will never want to leave your home bar. The 30" Return turns this Bar into a perfect 'L' shape adding extra seating space.The Return can be assembled on either side of the Bar and includes the foot rail to match

The 88' Carmella Bar is finished in a rich Chardonnay stain with Cobalt accent hardware,beautiful Walnut burl decorative panels and a foot pole. This Bar also allows for fridge access,comes with an ice bucket,dual bottle wells,glass stemware holders and a wine bottle storage rack. The interior of the Bar has plenty of storage shelving,locking cabinets and easy-glide storage drawers

The 88' Carmella Bar is finished in a rich Navajo Walnut stain with Cobalt accent hardware,beautiful Walnut burl decorative panels and a foot pole. This Bar also allows for fridge access,comes with an ice bucket,dual bottle wells,glass stemware holders and a wine bottle storage rack. The interior of the Bar has plenty of storage shelving,locking cabinets and easy-glide storage drawers

This Angelina Bar and Cabinet functions as both a magnificent Server and a subtle yet elegant piece of Furniture.

This Gabriella Bar's simplistic beauty combined with its convenient size make it the perfect functional accent piece for rooms of all shapes and sizes

Lexington Decorative Deluxe Panel Bar with plenty of storage space.

Lexington Decorative Deluxe Panel Bar with plenty of storage space.

This 58" Trenton Bar is finished with a rich Suede Walnut finish and a decorative front panel.This Bar has plenty of storage shelving and a place for a fridge. Works great with Designer Bar stools

This 58" Trenton Bar is finished with a rich Black finish and a decorative front panel.This Bar has plenty of storage shelving and a place for a fridge. Works great with Designer Bar stools

2 - 57" cue sticks Set of Balls Plastic Triangle Chalk

4 - 57" 2 piece maple cue 1 - 9" nylon table brush 1 - plastic triangle 1 - plastic 9 ball diamond rack 1 - bridge 1 - 6 cue wall rack 1 - billiard ball set 1 - table cover 1 - chalk

OUR MOST POPULAR KIT DESIGNER ACCESSORY KIT 4 – Two piece 57” Solid Maple Cues 1 Bridge Stick 1 Bridge Head 1 Designer Billiard balls 1- 9 ball wood rack 1- 15 Ball Wood rack 1 – 10.5 Table Brush 1 – 7” Rail brush 1 – Repair Kit 1 - Fitted Table Cover

Matching finish to your Pool Table Matching Pinnacle hardwood 15-ball rack, 9-ball rack, and matching 10 1/2” hardwood horse hair brush. Matching hardwood wall mounted rack. Four Pinnacle 58” two-piece maple cues with Irish Linen wrap One Premium 48” two-piece maple cue with soft touch grip. Deluxe vinyl table cover Two-piece bridge cue with soft touch grip with brass bridge head. Leather shaker bottle, wooden tally balls and rule book Aramith Premier Balls

Add a hidden storage drawer to most major brands of 7, 8 or 9-foot billiard tables with Legacy's patented Perfect Drawer. The Perfect Drawer stores all billiard accessories safely and indiscreetly under your billiard table. The Perfect Drawer mounts quickly and easily underneath any seven, eight or nine-foot billiard table without special tools or retrofitting. A slight pull on the Perfect Drawer glides the drawer out to reveal all your accessories. Inside, the protective felt liner cradles each cue, ball and rack in organized partitions.The Perfect Drawer fits most 9-foot tables with the converter kit. Center-beam billiard tables will need the center beam adapter kit.

Includes four paddles, balls and net.

With its classic “numbers in the stripe” look and tight cosmetic criteria, it is the perfect compromise between quality and price. Belgian Aramith Premier phenolic resin 2 1/4" diameter balls are the ultimate in billiard balls.

Each Magnum set is cast using a special DAP (diallyl pthalate prepolymer) resin. DAP resins are known for their excellent dimensional stability and heat resistance, along with a high resistance to sudden, extreme jolts and severe stresses. Compare to Elephant Beautiful Balls at half the price

The Aramith Tournament Pool Ball set is the new generation of billiard balls featuring the Duramith technology. The Duramith resin formulation with it's hi-tech engineered molecular structure, drastically enhances the longevity of the Aramith ball sets while significantly minimizing table cloth wear

The top of the line Belgian Aramith balls. Aramith Super Pro billiard balls are the choice of pro tournaments worldwide. They are made of the highest grade Phenolic Resin which is far more durable than polyester. These billiard balls must meet 8 different quality control standards for denstiy, balance, diameter, roundness, color, gloss, hardness, and weight, measured to professional specifications

Not necessary to hunt nor to be in the armed forces to play with the Aramith camouflage set. But one thing is sure, the game is raised to the next level : a combat mission. The Aramith Camouflage set features a beautiful up-to-date camo design, and belongs to the Aramith Add-Ons range

Available in Oak and Mahogany Stain