Basement Woodworks Inc/Accolades Awards and Trophies

15" x 24" Shadow Box is made of solid wood construction in your choice of Oak, Mahogany, Walnut or Cherry. Fit a standard 3'x 5' or 4' x 6' flag. MDF back incorporates a foam pad covered in blue, red, black, or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

26" x 21" Shadow Box Solid wood construction in your choice of Oak, Mahogany, Walnut or Cherry. Fit a standard 3'x 5' or 4' x 5' flag. MDF back incorporates a foam pad covered in blue, red, black, or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

28" x 20" Dual Flag Shadow Box is made of solid wood construction in your choice of Oak, Mahogany, Walnut or Cherry. Fit a standard 3'x 5' or 4' x 6 flag. MDF back incorporates a foam pad covered in blue, red, black, or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

28" x 20" Single Flag Shadow Box is made of solid wood construction in your choice of Oak, Mahogany, Walnut or Cherry. Fit a standard 3'x 5', 4' x 6', or 5' x 9' (funeral) flag. MDF back incorporates a foam pad covered in blue, red, black, or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

32" x 24" Dual Flag Shadow Box is made of solid wood construction in your choice of Oak, Mahogany, Walnut or Cherry. Fit a standard 3'x 5', 4' x 6' or 5' x 9' (funeral) flag. MDF back incorporates a foam pad covered in blue, red, black, or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

The Colonial Shadow Box can fit a 3' x 5', 4' x 6' or 5' x 9' flag. Case was designed to house the Lone Sailor and the Chief's Statue in the wing compartments. Overall award compartment is 28"W x 11"H. Please specify flag size when ordering. Please allow 2- 6 weeks for assembly and shipping.

The Colonial II Shadow Box fits 3' x 5', 4' x 6' or a 5' x 9' flag. The case is constructed with your choice of wood, Oak, Mahogany, Walnut, or Cherry and all three bays are lighted. The center compartment measures 12 1/2" x 12 1/2" and the wing compartments measure 6" W x 12 1/2"H. The overall widtth is 30" and the height is 24" or 28". Please allow 2- 6 weeks for assembly and shipping.

The Grand Colonial Shadow Box can be made of solid Oak, Mahogany, Walnut, or Cherry. The case can be made to fit 3' x 5', 4' x 6', or 5' x 9' (funeral) flags. Center viewing area measures 20"W x 12.5"H and widens as it tapers back. The two wing compartments are angled at 22 1/2 degrees. The viewing area is approximately 8" wide and widens as it tapers back. Eack compartment is lighted by a low voltage 12 volt puck light. Please allow 2- 6 weeks for assembly and shipping.

The Harley II Shadow Box measures approximately 24” tall by 30” wide and can be made in Oak, Mahogany, Walnut, and Cherry. All window areas are covered in glass. Please allow 2- 6 weeks for assembly and shipping.

The Harley Shadow Box measures approximately 24” tall by 30” wide and can be made in Oak, Mahogany, Walnut, and Cherry. The solid center section of The Harley can be used to inlay coins at an additional cost. Please see the optional services page. All window areas are covered in glass. Please allow 2- 6 weeks for assembly and shipping.

The Congressional (Large). Overall width is 32". wing compartment measure 11" W x 10"H. The center section is approximately 6"W x 10" H. Overall depth is 3 1/2" and can be made to fit 3'x5", 4'x6', and 5'x9' (funeral) flags. Please allow 2- 6 weeks for assembly and shipping.

Large Square Shadow Box is 24"x24" with corner flag case. Solid wood construction in youir choice of Oak, Mahogany, Walnut or Cherry. Fits 3'x 6', 4'x 6', 5'x9' flags. MDF back incorporates a foam pad covered in blue, red, black or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

Large Traditional Shadow Box overall award compartment measures 15"H x 24"W. can be made to fit 3'x5", 4'x6', and 5'x9' (funeral) flagswith a felt and foam covered MDF backer. Can be covered in blue, black, red, or green felt. Please allow 2- 6 weeks for assembly and shipping.

The Master At Arms Shadow Box is approximately 30” H x 24”W x 2”D and will fit a 3’ x 5’ nylon flag. All compartments have glass fronts and can be made in Oak, Mahogany, Walnut, and Cherry. Please allow 2- 6 weeks for assembly and shipping.

Mini Shadow Box measures 15" x 10" x 1 3/4" with removable back. Backer is covered with 1/4" foam board and can be covered in blue, black, red, or green felt. Please allow 2- 6 weeks for assembly and shipping.

The Sea Chest is made from solid wood in Oak, Mahogany, Walnut, and Cherry. The case measures 32”W x 15”D x 14”H. The inside has 3 bays including a viewing port for the center section. The inside is lined with aromatic cedar and felt color of your choice. The corners are dovetailed and the out side is decorated in brass accents and rope beckets on each side. The top lid opens to access the upper shadow box in order to arrange your awards. Please allow 2- 6 weeks for assembly and shipping.

Ships Wheel Shadow Box Holds 3' x 5' nylon flag. Oak, Mahogany, Walnut, or Cherry. 24" outside diameter with a 21" inside diameter with ample room for awards, patches and pins. Capped off with hand turned handles on the outside. Overall Height and width including the handles 35"H x 35"W x 2"(depth). Please allow 3-6 weeks for assembly.

The Congressional (small). Overall width is 26". Wing compartments measure 7"W x 7"H and the center section is approximately 6" W x 7" H. Overall depth is 3 1/2". Can be made to fit 3'x5", 4'x6', and 5'x9' (funeral) flags. Please allow 2- 6 weeks for assembly and shipping.

Small Square Shadow Box 20" x 20" with corner flag case. Solid wood construction in your choice of Oak, Mahogany, Walnut or Cherry. Fits 3'x 6', 4'x 6', 5'x9' flags. MDF back incorporates a foam pad covered in blue, red, black or green felt to aid with award placement. Please allow 2- 6 weeks for assembly and shipping.

The Commander can be made to fit 3'x5", 4'x6', and 5'x9' (funeral). Awards Compartment measures 24" x 24" and Flag compartment will accommodate flags up to casket size. Extremely large shadow box. Please allow 2- 6 weeks for assembly and shipping.

The Engineman (EN) Cog Shadow Box is approximately 24” in diameter and is of solid wood construction with a Plexiglas front. This box can hold a 3’ x 5’ nylon flag and can be made from Oak, Mahogany, Walnut, and Cherry. Please allow 2- 6 weeks for assembly and shipping.

The Fire Fighter Shadow Box is made of solid oak and all window areas are covered with glass. The overall dimensions are 36” x 36” and the center section is 24” in diameter and will accommodate a 3’ x 5’ flag. Total depth of this case is 2”. Please allow 2- 6 weeks for assembly and shipping.

The Iraqi Shadow Box is made from solid wood and measures approximately 30” H x 24”W x 2”D with a glass front. Can be made with a cross member for a flag and can be made from Oak, Mahogany, Walnut, and Cherry. Please allow 2- 6 weeks for assembly and shipping.

The President Shadow Box can be made to fit 3'x5", 4'x6', and 5'x9' (funeral) flags. The box gives an award display area of 8" x 14" and a solid side area to list command history of 8" x 6". Please allow 2- 6 weeks for assembly and shipping.

The Senator can be made in solid Oak, Mahogany, Walnut or Cherry and can fit 3'x5", 4'x6', and 5'x9' (funeral) flags. Compartments measure approx 7" x 8" and 5" x 8" with 2 drawers to the bottom. Drawer are 12" W x 3" H x 4 1/2" D with solid brass pulls. Overall dimensions are 24" W x 24" H x 5 5/8" D. Please allow 2- 6 weeks for assembly and shipping.

The Harley Shadow Box measures approximately 24” tall by 30” wide and can be made in Oak, Mahogany, Walnut, and Cherry. The solid center section of The Harley can be used to inlay coins at an additional cost. Please see the optional services page. All window areas are covered in glass. Please allow 2- 6 weeks for assembly and shipping.

The Traditional Shadow Box can be made to fit 3'x5", 4'x6', and 5'x9' (funeral) flags and can be made with or without compartments. The compartment measures approximately 6 1/2" x 6 1/2" and has a foam board backer for awards placement. Overall case dimensions are 24"W x 20"H and can be covered in blue, black, red, or green felt. Please allow 2- 6 weeks for assembly and shipping.

20 inch, 24 inch, and 30" carved wooden breast insignias and warfare devices.

Our high quality Die Struck and Die Cast coins are used for everything from the US Military to travel soccer teams. Our handmade 2D and 3D molds will bring your artwork to life. With several color fill options we can deliver a vibrant, detailed coin. · PRICE INCLUDES: Price includes double sided coin with up to 4 soft enamel colors per side and individually poly bagged. · ADDITIONAL COLORS: $.12 per color for soft enamel. · COIN EDGE: $.70 per piece on die struck. · COLORFILL: $.30 per color for imitation hard enamel. · CUT-OUTS (PIERCINGS): $30.00 per cut-out on die struck. · DUAL PLATING: Add 30% to the piece price. · DIAMOND CUT: $.80 per side on die struck. · EPOXY DOME: $.20 per side. · FINISH: Bright or antique gold, silver or bronze, black nickel. · LESS THAN MINIMUM: $125.00. · PMS COLOR MATCH: Available. · PRE-PRODUCTION SAMPLE: 125.00 plus die charge. Adds 2 weeks to production time. 50% of sample charge rebated upon production order. · PRESENTATION PACKAGING: Lucite Boxes and pouches available · PRODUCTION TIME: 5 weeks from approved art. · SANDBLAST: Add 10% to piece price. · THICKNESS: 3mm standard. For die cast add 10% for each additional .5mm. For thicker die struck coins please call for quote. · 3D DIE CHARGE: Add $80.00 per side, to 2D die charge. DIE STRUCK - 5 WEEK PRODUCTION QTY QTY QTY QTY QTY Size 100 300 500 1000 2500 2D Die WT/100 1 1/4” $5.76 $4.48 $3.92 $3.60 $3.28 $110.00 7.0 LBS. 1 1/2” $6.06 $4.74 $4.16 $3.82 $3.56 $120.00 8.0 LBS. 1 3/4’ $6.86 $5.42 $4.80 $4.42 $4.16 $135.00 10.0 LBS. 2” $8.76 $6.82 $6.06 $5.62 $5.28 $150.00 12.0 LBS. 2 1/4” $9.98 $8.30 $7.40 $6.80 $6.36 $170.00 15.0 LBS. 2 1/2” $12.96 $10.98 $9.88 $9.22 $8.76 $190.00 18.0 LBS DIE CAST - 5 WEEK PRODUCTION Size 100 300 500 1000 2500 2D Die WT/100 1 1/4” $4.52 $3.36 $2.94 $2.68 $2.46 $160.00 5.0 LBS. 1 1/2” $4.80 $3.60 $3.12 $2.86 $2.66 $170.00 6.0 LBS. 1 3/4’ $5.20 $3.98 $3.46 $3.18 $2.96 $190.00 8.0 LBS. 2” $5.76 $4.44 $3.90 $3.60 $3.36 $210.00 10.0 LBS. 2 1/4” $6.70 $5.28 $4.68 $4.20 $4.04 $225.00 12.0 LBS. 2 1/2” $7.40 $5.92 $5.24 $4.86 $4.54 $245.00 14.0 LBS. 2 3/4” $8.78 $7.12 $6.30 $5.86 $5.54 $265.00 16.0 LBS. 3” $9.86 $8.10 $7.24 $6.72 $6.34 $285.00 20.0 LBS. Please upload artwork image and state type of coin, quantity, and any other pertinent information for a quote.

Custom embroidered patches allow you to present your logo on a range of wearable items including hats, jackets, shirts, and much more MEDALLIONS PRICING PRODUCT INFO · PRICE INCLUDES: Up to 7 thread colors. · ADDITIONAL COLORS: $.20 (P) per color up to 9. · BACKING: Heat Seal $.10 (P) per inch. Adhesive $.20 (P) per inch. Velcro : Call for quote. · LESS THAN MINIMUM: $125.00 (V). · PRE-PRODUCTION SAMPLE: $125.00 (V) adds 2 weeks to production time. 50% rebated upon production order. · PRODUCTION TIME: 3 weeks from approved art. PLEASE INDICATE REQUIRED PATCH SIZE, QUANTITY AND UPLOAD ARTWORK FOR QUOTE Patch size equals length plus width divided by 2 (i.e. 2” x 4” patch is figured 2 + 4 = 6 ÷ 2= 3” size) QTY 100 PIECES QTY 150 PIECES QTY 350 PIECES QTY 550 PIECES QTY 1000 PIECES 2” $2.30 $2.08 $1.78 $1.48 $1.18 2 1/2” $2.70 $2.38 $1.98 $1.70 $1.44 3” $3.28 $2.96 $2.34 $1.98 $1.72 3 1/2” $3.98 $3.66 $2.90 $2.40 $2.06 4” $4.66 $3.88 $3.18 $2.72 $2.30 4 1/2” $5.30 $4.60 $3.54 $2.98 $2.54 5” $6.10 $5.36 $4.18 $3.38 $3.10