Intoxalock is the no. 1 ignition interlock device brand in the U.S., and Intoxalock Ignition Interlock in Cadott, WI is here to help you get back on the road after a DUI.
Intoxalock has more locations than any other provider, and we can find an interlock installation location near you. We will help you understand WI interlock, or IID, laws and regulations. Our interlock installation locations are staffed with certified professionals who will install and service your car breathalyzers. For 30 years, Intoxalock has been a trusted interlock ignition device provider. Call now to talk to a WI expert.
Frequently Asked Questions About Intoxalock Ignition Interlock
How does an interlock device work?
An ignition interlock device (IID) is a small breathalyzer installed in your vehicle to prevent it from starting if alcohol is detected on your breath. Before driving, you'll blow into the device. If your breath alcohol concentration (BrAC) is below the programmed limit, the car starts. Periodic retests occur during your trip to ensure continued compliance. To read more on Intoxalock, you can read our ignition interlock device guide.
What is the cost of an ignition interlock device?
The installation of an ignition interlock device, often called a car breathalyzer, typically costs between $70 and $150. This one-time fee is paid at the start of your lease and covers the service center's labor to install the device in your vehicle. Payment is made directly to the service center at the time of installation. For more on cost breakdowns, you can read our cost of ignition interlock device guide.
How do I use my interlock device?
Using an IID is simple. To start your vehicle, blow into the device as directed. If the device detects no alcohol, your car will start. You may be prompted for "rolling retests" while driving, where you’ll blow into the device again to confirm compliance. How-to videos are also available on the Intoxalock mobile app.
Where do I get an ignition interlock device?
Ignition interlock devices can be installed at certified service centers nationwide. Intoxalock offers a convenient network of locations and helps you schedule an installation appointment near you. Visit our Intoxalock locations page or call us to find the nearest service center and begin the installation process.
How long will my installation take?
Installing an ignition interlock device typically takes 1-2 hours, depending on your vehicle type. Certified technicians ensure the device is properly installed and provide you with training on how to use it. Contact Intoxalock for an appointment and an accurate time estimate for your installation.
What happens if I fail a breath test on my ignition interlock device?
If you fail a breath test, your vehicle will not start, and the device will log the event. Depending on your state’s regulations, multiple failed tests may trigger additional penalties, such as lockouts or reporting to your monitoring authority. Intoxalock devices allow you to retest after a short wait if alcohol is no longer detected. Always follow your state’s guidelines to remain compliant.
Can I install an ignition interlock device in a vehicle I don’t own?
Yes, in most cases, you can install an ignition interlock device in a vehicle you regularly drive, even if you’re not the registered owner. However, the vehicle owner must provide consent for the installation. Intoxalock works with you and the owner to ensure compliance with state regulations and the successful setup of the device.
What should I do if my ignition interlock device locks me out?
If your ignition interlock device locks you out, it’s usually due to missed tests, failed tests, or state-specific requirements. Intoxalock offers a simple lockout override process in most cases to help you get back on the road quickly. Contact Intoxalock customer support for assistance and to understand the steps needed to resolve the issue.
What is an ignition interlock device and how does it work?
An ignition interlock device is a breathalyzer installed in your vehicle that prevents the engine from starting if it detects alcohol on your breath. You must blow into it before driving, and periodic retests maintain compliance.
How much does it cost to install an ignition interlock device with Intoxalock?
Installation typically costs between $70 and $150, a one-time fee paid at the start of your lease covering labor to install the device at a service center.
How do I use my Intoxalock ignition interlock device?
To use the device, blow into it as directed before starting your vehicle. If no alcohol is detected, the car will start. You may be asked for random retests during your trip.
Where can I get my ignition interlock device installed in Cadott, WI?
You can schedule installation at Intoxalock Ignition Interlock located at 433 E Chippewa Street, Cadott, WI, or at certified service centers nearby.
What are the business hours for Intoxalock Ignition Interlock in Cadott?
The service center is open daily from 8:00 AM to 5:00 PM.
What should I do if my ignition interlock device locks me out?
If locked out due to missed or failed tests, contact Intoxalock customer support for assistance and to follow the lockout override process.
Can I install an ignition interlock device in a vehicle I don’t own?
Yes, with the vehicle owner's consent, you can install the device in a car you drive regularly.
How can nearby places like Cadott Auto Sales and Jeff's Auto Service help someone visiting Intoxalock?
Cadott Auto Sales and Jeff's Auto Service located near Intoxalock can assist with vehicle purchase and repair needs before or after installation of your ignition interlock device.
What nearby convenience stores and gas stations are close to Intoxalock in Cadott?
BP and Kwik Trip are nearby convenience stores and gas stations where you can refuel or grab essentials when visiting Intoxalock.
Are there entertainment or dining options near Intoxalock Ignition Interlock?
Yes, DJ's Restaurant offers dining, and Rustic Lanes and Ruthie's Bar & Bowl provide entertainment options nearby to visit before or after your appointment.