Intoxalock is the no. 1 ignition interlock device brand in the U.S., and Intoxalock Ignition Interlock in Sandy, UT is here to help you get back on the road after a DUI.
Intoxalock has more locations than any other provider, and we can find an interlock installation location near you. We will help you understand UT interlock, or IID, laws and regulations. Our interlock installation locations are staffed with certified professionals who will install and service your car breathalyzers. For 30 years, Intoxalock has been a trusted interlock ignition device provider. Call now to talk to a UT expert.
Read many reviews on Intoxalock before getting my device installed and was surprised to see how many of them were false. The amount of surprise charges was astonishing. Was told the removal of my device would be $125 but instead was charged $225. After I had my device installed into my car in December of 2024 it came out looking fine only to find out during the installation the service center had broken my accessory socket in my dash had been broken or short circuited due to the install but was never made aware of it until 2 months after the install. Was very upset with my experience with the service center I went through. Hard to get in contact with them and when I did they were rude and very short ended. Was not satisfied with my experience with Intoxalock, hence why I had my device removed and have moved to a different interlock company.
QS
quint sharp
Aug 3, 2025
5.0
Polite and gets the job done in a very timely manner
DR
David Romero
Jul 10, 2025
3.0
Got me in for the install immediately. However, the one on one, in person tutorial left alot to be desired.
Frequently Asked Questions About Intoxalock Ignition Interlock
How does an interlock device work?
An ignition interlock device (IID) is a small breathalyzer installed in your vehicle to prevent it from starting if alcohol is detected on your breath. Before driving, you'll blow into the device. If your breath alcohol concentration (BrAC) is below the programmed limit, the car starts. Periodic retests occur during your trip to ensure continued compliance. To read more on Intoxalock, you can read our ignition interlock device guide.
What is the cost of an ignition interlock device?
The installation of an ignition interlock device, often called a car breathalyzer, typically costs between $70 and $150. This one-time fee is paid at the start of your lease and covers the service center's labor to install the device in your vehicle. Payment is made directly to the service center at the time of installation. For more on cost breakdowns, you can read our cost of ignition interlock device guide.
How do I use my interlock device?
Using an IID is simple. To start your vehicle, blow into the device as directed. If the device detects no alcohol, your car will start. You may be prompted for "rolling retests" while driving, where you’ll blow into the device again to confirm compliance. How-to videos are also available on the Intoxalock mobile app.
Where do I get an ignition interlock device?
Ignition interlock devices can be installed at certified service centers nationwide. Intoxalock offers a convenient network of locations and helps you schedule an installation appointment near you. Visit our Intoxalock locations page or call us to find the nearest service center and begin the installation process.
How long will my installation take?
Installing an ignition interlock device typically takes 1-2 hours, depending on your vehicle type. Certified technicians ensure the device is properly installed and provide you with training on how to use it. Contact Intoxalock for an appointment and an accurate time estimate for your installation.
What happens if I fail a breath test on my ignition interlock device?
If you fail a breath test, your vehicle will not start, and the device will log the event. Depending on your state’s regulations, multiple failed tests may trigger additional penalties, such as lockouts or reporting to your monitoring authority. Intoxalock devices allow you to retest after a short wait if alcohol is no longer detected. Always follow your state’s guidelines to remain compliant.
Can I install an ignition interlock device in a vehicle I don’t own?
Yes, in most cases, you can install an ignition interlock device in a vehicle you regularly drive, even if you’re not the registered owner. However, the vehicle owner must provide consent for the installation. Intoxalock works with you and the owner to ensure compliance with state regulations and the successful setup of the device.
What should I do if my ignition interlock device locks me out?
If your ignition interlock device locks you out, it’s usually due to missed tests, failed tests, or state-specific requirements. Intoxalock offers a simple lockout override process in most cases to help you get back on the road quickly. Contact Intoxalock customer support for assistance and to understand the steps needed to resolve the issue.
What services does Intoxalock Ignition Interlock in Sandy, UT provide?
Intoxalock Ignition Interlock in Sandy, UT provides installation, calibration, and removal of ignition interlock devices (IIDs) with certified professionals to help you get back on the road after a DUI.
How does an ignition interlock device work?
An IID is a breathalyzer installed in your vehicle that prevents the car from starting if alcohol is detected on your breath. You must blow into the device before driving and during periodic retests to ensure compliance.
What is the typical cost for installing an ignition interlock device?
The installation fee usually ranges from $70 to $150 as a one-time payment to the service center at installation time. Additional fees and lease payments may apply.
Where can I get an ignition interlock device installed near Sandy, UT?
Ignition interlock devices can be installed at certified Intoxalock service centers nationwide, including the location in Sandy, UT at 537 W 9460 S. You can schedule an appointment through their website or by calling.
What are the business hours for Intoxalock Ignition Interlock in Sandy?
The installation location is open Monday through Friday from 7:00 AM to 4:30 PM, Fridays until 3:30 PM, Saturdays from 7:00 AM to 12:00 PM, and closed on Sundays. Online services are available 24/7.
How long does the installation of an ignition interlock device take?
Installation typically takes 1 to 2 hours depending on your vehicle type, including training on how to use the device.
What happens if I fail a breath test on my ignition interlock device?
If you fail a test, your vehicle won't start, and the event is logged. Multiple failed attempts may trigger penalties. You can retest after a waiting period if no alcohol is detected.
What nearby dining options are available when visiting Intoxalock Ignition Interlock in Sandy?
Nearby eateries include Papa Doug's Dogs, a fast-food restaurant and food truck, and Big Daddy Hill's, both convenient options for a meal before or after your appointment.
Are there other automotive-related services near Intoxalock Ignition Interlock in Sandy?
Yes, nearby businesses like CSG Solutions offer automotive parts and accessories, Lithium Auto Elixirs provides auto detailing and repairs, and Utah Mobile Auto Glass offers automotive repair services, helpful for maintaining your vehicle.
Can nearby transit or services assist in reaching Intoxalock Ignition Interlock in Sandy?
While specific transit stations are not listed, the Sandy, UT location is accessible by local roads near several businesses and landmarks such as Go Mattress and Rare Breed Plumbing, making it easier to find or combine visits.