Intoxalock is the no. 1 ignition interlock device brand in the U.S., and Intoxalock Ignition Interlock in Whitehall, MT is here to help you get back on the road after a DUI.
Intoxalock has more locations than any other provider, and we can find an interlock installation location near you. We will help you understand MT interlock, or IID, laws and regulations. Our interlock installation locations are staffed with certified professionals who will install and service your car breathalyzers. For 30 years, Intoxalock has been a trusted interlock ignition device provider. Call now to talk to a MT expert.
Frequently Asked Questions About Intoxalock Ignition Interlock
How does an interlock device work?
An ignition interlock device (IID) is a small breathalyzer installed in your vehicle to prevent it from starting if alcohol is detected on your breath. Before driving, you'll blow into the device. If your breath alcohol concentration (BrAC) is below the programmed limit, the car starts. Periodic retests occur during your trip to ensure continued compliance. To read more on Intoxalock, you can read our ignition interlock device guide.
What is the cost of an ignition interlock device?
The installation of an ignition interlock device, often called a car breathalyzer, typically costs between $70 and $150. This one-time fee is paid at the start of your lease and covers the service center's labor to install the device in your vehicle. Payment is made directly to the service center at the time of installation. For more on cost breakdowns, you can read our cost of ignition interlock device guide.
How do I use my interlock device?
Using an IID is simple. To start your vehicle, blow into the device as directed. If the device detects no alcohol, your car will start. You may be prompted for "rolling retests" while driving, where you’ll blow into the device again to confirm compliance. How-to videos are also available on the Intoxalock mobile app.
Where do I get an ignition interlock device?
Ignition interlock devices can be installed at certified service centers nationwide. Intoxalock offers a convenient network of locations and helps you schedule an installation appointment near you. Visit our Intoxalock locations page or call us to find the nearest service center and begin the installation process.
How long will my installation take?
Installing an ignition interlock device typically takes 1-2 hours, depending on your vehicle type. Certified technicians ensure the device is properly installed and provide you with training on how to use it. Contact Intoxalock for an appointment and an accurate time estimate for your installation.
What happens if I fail a breath test on my ignition interlock device?
If you fail a breath test, your vehicle will not start, and the device will log the event. Depending on your state’s regulations, multiple failed tests may trigger additional penalties, such as lockouts or reporting to your monitoring authority. Intoxalock devices allow you to retest after a short wait if alcohol is no longer detected. Always follow your state’s guidelines to remain compliant.
Can I install an ignition interlock device in a vehicle I don’t own?
Yes, in most cases, you can install an ignition interlock device in a vehicle you regularly drive, even if you’re not the registered owner. However, the vehicle owner must provide consent for the installation. Intoxalock works with you and the owner to ensure compliance with state regulations and the successful setup of the device.
What should I do if my ignition interlock device locks me out?
If your ignition interlock device locks you out, it’s usually due to missed tests, failed tests, or state-specific requirements. Intoxalock offers a simple lockout override process in most cases to help you get back on the road quickly. Contact Intoxalock customer support for assistance and to understand the steps needed to resolve the issue.
What services does Intoxalock Ignition Interlock in Whitehall, MT offer?
Intoxalock Ignition Interlock provides installation, calibration, and removal of ignition interlock devices (IIDs) to help drivers comply with DUI regulations.
How do ignition interlock devices (IIDs) installed by Intoxalock work?
IIDs are breathalyzer devices installed in vehicles that prevent starting if alcohol is detected on the driver's breath. Users blow into the device before driving and may be prompted for retests during the trip.
How much does it cost to install an ignition interlock device at Intoxalock in Whitehall?
Installation typically costs between $70 and $150, covering labor at the service center and paid directly during installation.
Where is Intoxalock Ignition Interlock located in Whitehall, MT?
The service center is located at 107 E Legion Hall, Whitehall, MT 59759, USA.
What are the operating hours of Intoxalock Ignition Interlock in Whitehall?
They are open Monday to Friday from 9:00 AM to 6:00 PM and closed on Saturdays and Sundays.
Can I install an ignition interlock device in a vehicle I do not own?
Yes, with the vehicle owner's consent. Intoxalock assists to ensure compliance with regulations in such cases.
What should I do if my ignition interlock device locks me out?
Contact Intoxalock customer support immediately for assistance and guidance on resolving lockouts due to missed or failed tests.
Are there any automotive service or parts providers near Intoxalock Ignition Interlock in Whitehall?
Yes, nearby are Whitehall Automotive LLC for auto detailing and glass service, as well as NAPA Auto Parts and Treasure State Truck & Auto Repair for parts and repairs.
Which nearby places can help with vehicle maintenance or tire services around Intoxalock?
Full Circle Tire offers tire sales and repairs near Intoxalock, providing convenient access to automotive services post IID installation.
Are there places to grab a coffee or meal near Intoxalock Ignition Interlock in Whitehall?
Yes, Cafe Elena is a nearby coffee shop, and K Bar & Grill offers American cuisine and bar services, ideal for customers visiting the area.