Intoxalock is the no. 1 ignition interlock device brand in the U.S., and Intoxalock Ignition Interlock in Shawnee, KS is here to help you get back on the road after a DUI.
Intoxalock has more locations than any other provider, and we can find an interlock installation location near you. We will help you understand KS interlock, or IID, laws and regulations. Our interlock installation locations are staffed with certified professionals who will install and service your car breathalyzers. For 30 years, Intoxalock has been a trusted interlock ignition device provider. Call now to talk to a KS expert.
Frequently Asked Questions About Intoxalock Ignition Interlock
How does an interlock device work?
An ignition interlock device (IID) is a small breathalyzer installed in your vehicle to prevent it from starting if alcohol is detected on your breath. Before driving, you'll blow into the device. If your breath alcohol concentration (BrAC) is below the programmed limit, the car starts. Periodic retests occur during your trip to ensure continued compliance. To read more on Intoxalock, you can read our ignition interlock device guide.
What is the cost of an ignition interlock device?
The installation of an ignition interlock device, often called a car breathalyzer, typically costs between $70 and $150. This one-time fee is paid at the start of your lease and covers the service center's labor to install the device in your vehicle. Payment is made directly to the service center at the time of installation. For more on cost breakdowns, you can read our cost of ignition interlock device guide.
How do I use my interlock device?
Using an IID is simple. To start your vehicle, blow into the device as directed. If the device detects no alcohol, your car will start. You may be prompted for "rolling retests" while driving, where you’ll blow into the device again to confirm compliance. How-to videos are also available on the Intoxalock mobile app.
Where do I get an ignition interlock device?
Ignition interlock devices can be installed at certified service centers nationwide. Intoxalock offers a convenient network of locations and helps you schedule an installation appointment near you. Visit our Intoxalock locations page or call us to find the nearest service center and begin the installation process.
How long will my installation take?
Installing an ignition interlock device typically takes 1-2 hours, depending on your vehicle type. Certified technicians ensure the device is properly installed and provide you with training on how to use it. Contact Intoxalock for an appointment and an accurate time estimate for your installation.
What happens if I fail a breath test on my ignition interlock device?
If you fail a breath test, your vehicle will not start, and the device will log the event. Depending on your state’s regulations, multiple failed tests may trigger additional penalties, such as lockouts or reporting to your monitoring authority. Intoxalock devices allow you to retest after a short wait if alcohol is no longer detected. Always follow your state’s guidelines to remain compliant.
Can I install an ignition interlock device in a vehicle I don’t own?
Yes, in most cases, you can install an ignition interlock device in a vehicle you regularly drive, even if you’re not the registered owner. However, the vehicle owner must provide consent for the installation. Intoxalock works with you and the owner to ensure compliance with state regulations and the successful setup of the device.
What should I do if my ignition interlock device locks me out?
If your ignition interlock device locks you out, it’s usually due to missed tests, failed tests, or state-specific requirements. Intoxalock offers a simple lockout override process in most cases to help you get back on the road quickly. Contact Intoxalock customer support for assistance and to understand the steps needed to resolve the issue.
How does an ignition interlock device (IID) installed by Intoxalock work?
An IID is a breathalyzer installed in your vehicle that prevents the engine from starting if alcohol is detected on your breath. You must blow into the device before driving, and periodic retests occur during your trip to ensure compliance.
What is the cost to install an ignition interlock device with Intoxalock?
Installation typically costs between $70 and $150, a one-time fee paid at the start of your lease covering the installation labor at the service center.
Where can I get an ignition interlock device installed near Shawnee, KS?
You can get an IID installed at certified service centers nationwide, including the Intoxalock Ignition Interlock location at 12111 Johnson Drive, STE C, Shawnee, KS 66216.
What are Intoxalock's service hours at the Shawnee location?
The Shawnee location is open Monday through Friday from 9:00 AM to 7:00 PM, Saturdays from 9:00 AM to 3:00 PM, and closed on Sundays.
What should I do if my ignition interlock device locks me out?
If locked out, it may be due to missed or failed tests. Intoxalock provides a lockout override process to help you get back on the road. Contact their customer support for assistance.
Can I install an IID on a vehicle I don’t own?
Yes, with the vehicle owner's consent, you can install an IID on a vehicle you regularly drive. Intoxalock assists with compliance and installation.
Are there nearby places to visit or services to use while at Intoxalock in Shawnee?
Yes, nearby places include Fun Services KC for arts and crafts, Harley's Hideaway Bar & Grill for dining, and Seven Stories bookstore. These can provide entertainment or refreshment while you wait.
Is there a nearby ATM close to Intoxalock for easy access to cash?
Yes, Bitcoin Depot - Bitcoin ATM is nearby, providing convenient access if you need cash or cryptocurrencies while visiting the area.
What other automotive or home services are located near Intoxalock’s Shawnee office?
Nearby you can find Johnny's Electrical Services and Mr Handyman by Sash Group, offering electrical and home improvement services, respectively, useful if you have related needs while in the area.