Get back on the road confidently with Intoxalock, the trusted Ignition Interlock Device (IID) provider of Tulare, California and the no. 1 interlock device brand in the U.S.. Located in the Tulare neighborhood at 1501 East Tulare Ave, we offer fast and affordable court-approved IID installation, calibration, and removal services. Our certified technicians ensure a smooth, stress-free experience while helping you stay compliant with California interlock laws. With 24/7 customer support, Intoxalock makes the process easy for drivers to regain their licenses after a DUI. Visit us in CA near you or call our state specialists to schedule your car breathalyzer installation and get back on the road safely!
Frequently Asked Questions About Intoxalock Ignition Interlock
How does an interlock device work?
An ignition interlock device (IID) is a small breathalyzer installed in your vehicle to prevent it from starting if alcohol is detected on your breath. Before driving, you'll blow into the device. If your breath alcohol concentration (BrAC) is below the programmed limit, the car starts. Periodic retests occur during your trip to ensure continued compliance. To read more on Intoxalock, you can read our ignition interlock device guide.
What is the cost of an ignition interlock device?
The installation of an ignition interlock device, often called a car breathalyzer, typically costs between $70 and $150. This one-time fee is paid at the start of your lease and covers the service center's labor to install the device in your vehicle. Payment is made directly to the service center at the time of installation. For more on cost breakdowns, you can read our cost of ignition interlock device guide.
How do I use my interlock device?
Using an IID is simple. To start your vehicle, blow into the device as directed. If the device detects no alcohol, your car will start. You may be prompted for "rolling retests" while driving, where you’ll blow into the device again to confirm compliance. How-to videos are also available on the Intoxalock mobile app.
Where do I get an ignition interlock device?
Ignition interlock devices can be installed at certified service centers nationwide. Intoxalock offers a convenient network of locations and helps you schedule an installation appointment near you. Visit our Intoxalock locations page or call us to find the nearest service center and begin the installation process.
How long will my installation take?
Installing an ignition interlock device typically takes 1-2 hours, depending on your vehicle type. Certified technicians ensure the device is properly installed and provide you with training on how to use it. Contact Intoxalock for an appointment and an accurate time estimate for your installation.
What happens if I fail a breath test on my ignition interlock device?
If you fail a breath test, your vehicle will not start, and the device will log the event. Depending on your state’s regulations, multiple failed tests may trigger additional penalties, such as lockouts or reporting to your monitoring authority. Intoxalock devices allow you to retest after a short wait if alcohol is no longer detected. Always follow your state’s guidelines to remain compliant.
Can I install an ignition interlock device in a vehicle I don’t own?
Yes, in most cases, you can install an ignition interlock device in a vehicle you regularly drive, even if you’re not the registered owner. However, the vehicle owner must provide consent for the installation. Intoxalock works with you and the owner to ensure compliance with state regulations and the successful setup of the device.
What should I do if my ignition interlock device locks me out?
If your ignition interlock device locks you out, it’s usually due to missed tests, failed tests, or state-specific requirements. Intoxalock offers a simple lockout override process in most cases to help you get back on the road quickly. Contact Intoxalock customer support for assistance and to understand the steps needed to resolve the issue.
What is an ignition interlock device and how does it work?
An ignition interlock device (IID) is a small breathalyzer installed in your vehicle to prevent it from starting if alcohol is detected on your breath. You blow into the device before driving, and if your breath alcohol concentration is below the set limit, the car starts. Periodic retests occur during your drive to ensure compliance.
How much does it cost to install an ignition interlock device at Intoxalock?
Installation typically costs between $70 and $150, paid as a one-time fee at the start of your lease. This fee covers the service center's labor to install the device in your vehicle, payable directly at installation.
Where can I get my ignition interlock device installed near Tulare, CA?
You can get your ignition interlock device installed at Intoxalock Ignition Interlock located at 1501 East Tulare Ave, Tulare, CA. They have certified technicians to assist with installation and compliance.
What are the business hours for Intoxalock Ignition Interlock in Tulare?
The business is open Monday through Friday from 8:00 AM to 5:30 PM, and is closed on Saturdays and Sundays.
What should I do if my ignition interlock device locks me out?
If your device locks you out due to missed or failed tests, contact Intoxalock customer support for assistance. They offer a lockout override process in most cases to help you get back on the road quickly.
Can I install an ignition interlock device in a vehicle I don't own?
Yes, you can install an ignition interlock device in a vehicle you regularly drive, even if you don’t own it, provided the vehicle owner consents to the installation.
Are there any nearby fitness centers to Intoxalock Ignition Interlock in Tulare?
Yes, FIT.s gym and Dick and Janes Gym and Studio are nearby fitness centers where you can exercise before or after your visit to Intoxalock.
What nearby automotive service providers can I visit along with Intoxalock Ignition Interlock?
Near Intoxalock, you can visit Tulare Smog for automotive repair, Bowser & Son Automotive for repairs and parts, and Troy’s Glass for window installations.
Are there any local schools or educational centers near Intoxalock Ignition Interlock in Tulare?
Yes, Tulare Adult School Welding, a vocational and technical school, and Tulare Joint Union High School District are nearby educational institutions.
Where can I find support resources or videos for using my ignition interlock device?
Intoxalock offers how-to videos and support through their mobile app 'Intoxalock Mobile' and on their YouTube channel at https://www.youtube.com/Intoxalock to help you use your device.