Business Details
About
Machine Shop
Ken-B-Done MFG. CO., Inc provides on-site machine maintenance, electrical controls, and installation and preventative maintenance to the Pennsylvania and surrounding states.
Location
Hours
Reviews
5.0
24 reviews
5 stars
24
4 stars0
3 stars0
2 stars0
1 star0
- JSJesse SauderNov 14, 20255.0They are very knowledgeable and get our machinery fixed in a timely matter.
- CWChris WilliamsOct 6, 20255.0Wonderful work and timely.
- DGDaniel GrijincuAug 25, 20255.0Ken-B-Done team has proved to be knowledgeable, courteous and pleasant when they serviced my machines and helped me solve issues with my compressor.
- PLPatiova LLCJul 10, 20235.0Good communication. quick response.
- JHJordan HallerDec 14, 20225.0Always does great work. Been using him for many years.
Frequently Asked Questions About Ken-B-Done MFG. CO., Inc.
What pricing can i expect from Ken B Done, MFG?
Our standard rate is $85 per hour during regular business hours. For emergency services after hours, we charge $125 per hour. The total cost varies depending on the specific job requirements.
What sets Ken B Done MFG apart from the competition?
Ken-B-Done distinguishes itself by utilizing American-made parts and providing efficient in-house machine shop services. We aim to reduce costs while offering quick service, regardless of your location.
How many years of experience does Ken B Done, MFG have?
Established in 1998, Ken-B-Done MFG has accumulated over 60 years of combined experience. We are a reliable choice for all woodworking equipment needs, including electrical panel upgrades, on-site machine maintenance, repairs, and preventative care.
What can be done if a machine or spindle has a vibration?
To address machine or spindle vibration, we recommend several steps: ensure proper machine leveling, enhance machine rigidity, verify spindle alignment, replace bearings if necessary, and consider spindle replacement as a last resort.
What can be done if the dust collection system is losing suction?
To improve dust collection system suction, consider balancing air ducts, installing blast gates, ensuring adequate airflow to prevent system suffocation, and modifying pipes to increase cubic feet per minute (CFM).
What happens if your compressor runs too much?
Excessive compressor operation may indicate water infiltration due to damaged fittings or lines, incorrectly sized pipes, or a need for compressor maintenance. These issues should be addressed promptly to ensure optimal performance.
Why does a wide belt sander belt not last long?
A wide belt sander's belt may have a shortened lifespan due to improper setup, uneven sanding heads, or damaged rolls and platen bars. Addressing these issues can help extend the belt's durability.
Why is it important to know how to run and operate your woodworking machine or any piece of equipment?
Understanding proper machine operation is crucial for employee safety, product quality assurance, prevention of equipment damage, proper maintenance, and maximizing the machine's capabilities.
Why is it important to do an OSHA lockout/tagout?
OSHA lockout/tagout procedures are essential for worker safety, identifying power sources (air, hydraulic, electric, gas, etc.), preventing accidents, and ensuring machines are not inadvertently started during maintenance or repair work.
What are the standard hourly rates for services at Ken-B-Done MFG?
Ken-B-Done MFG charges $85 per hour during regular business hours and $125 per hour for emergency services after hours.
What makes Ken-B-Done MFG stand out from other machine shops?
They use American-made parts and provide efficient in-house machine shop services to reduce costs and offer quick service regardless of location.
How experienced is Ken-B-Done MFG in machine maintenance and repair?
Established in 1998, Ken-B-Done MFG has over 60 years of combined experience in woodworking equipment maintenance, repairs, and electrical upgrades.
How can I address vibration issues in my woodworking machine or spindle?
You should ensure proper machine leveling, improve machine rigidity, verify spindle alignment, replace bearings if needed, and consider spindle replacement as a last resort.
What can be done if my dust collection system is losing suction?
Balancing air ducts, installing blast gates, ensuring proper airflow, and modifying pipes to increase CFM can improve suction in dust collection systems.
Why might my wide belt sander's belt not last long?
Short belt lifespan is often due to improper setup, uneven sanding heads, or damaged rolls and platen bars, which should be addressed to extend belt durability.
What are Ken-B-Done MFG's business hours?
They are open Monday through Friday from 7:00 AM to 5:00 PM and closed on Saturdays and Sundays.
Where is Ken-B-Done MFG located?
Ken-B-Done MFG is located at 405 School Rd, Door #34, Denver, PA 17517, USA.
What nearby facilities can customers visit before or after their appointment at Ken-B-Done MFG?
Customers can visit Brecknock Elementary School, Hawk Valley Golf Course, and local dining options such as Burger King in Denver, PA.
How can nearby places like Scenic Road Manufacturing support customers of Ken-B-Done MFG?
Scenic Road Manufacturing, specializing in agricultural services and outdoor gear, may complement the industrial and manufacturing needs of Ken-B-Done MFG customers in the area.