Frequently Asked Questions About Design Blasting Services LLC
What safety precautions are taken?
We prioritize safety by strictly following industry standards, which include thorough site inspections, mandatory use of personal protective equipment (PPE), and full compliance with OSHA regulations. Before any detonation, we ensure the blast area is completely cleared and secured, with clear warning signals provided. In cases where structures are in close proximity, we may employ blasting mats to contain any potential flying debris.
Is blasting dangerous to nearby structures?
Our blasters adhere to stringent guidelines for vibration and air blast limits, which are based on extensive research to prevent structural damage, including cosmetic cracking. It's worth noting that ground vibrations from controlled blasting are often less intense than those caused by everyday household activities, such as slamming doors.
How are vibrations and noise measured?
We utilize seismographs to accurately measure ground vibration (peak particle velocity) and air blast (decibels or pressure) levels at the nearest structures. To ensure objectivity and prevent tampering, the data is digitally stored and coded.
What are the allowable vibration levels?
Allowable vibration levels can vary depending on state and local ordinances. However, they generally adhere to standards recommended by the U.S. Bureau of Mines, which often set the limit at around 2.0 inches per second Peak Particle Velocity (PPV).
Who is qualified to conduct blasting?
Only certified blasters with proper licenses and extensive experience are authorized to conduct blasting operations. This typically involves comprehensive training and strict adherence to federal and state regulations, including obtaining necessary permits such as those from the ATF (Bureau of Alcohol, Tobacco, Firearms and Explosives).
Why is blasting necessary?
Blasting remains the most efficient and cost-effective method for fragmenting hard rock for excavation purposes. This process is essential for various construction projects, including road building, commercial structure development, and mining operations.
What is a pre-blast survey?
A pre-blast survey is a detailed documentation of the existing condition of structures within a specified distance from the blast zone, typically 500 or 750 feet. This survey serves to protect both property owners and the blasting company by establishing a baseline condition in the event of any damage claims.
Can blasting damage my well or septic tank?
Below-ground structures such as wells and septic tanks are generally less susceptible to blast-induced damage compared to above-ground structures. This is because they are confined by the surrounding earth and experience less movement in response to ground waves. The safety standards we employ to protect houses also effectively safeguard these underground structures.
Are the effects of blasting cumulative?
No, the effects of blasting are not cumulative. Each blast is an independent, short-duration event that does not result in stored vibration energy within structures. Therefore, there is no accumulation of effects over time.
What safety precautions does Design Blasting Service LLC take during blasting operations?
Design Blasting Service LLC prioritizes safety by following industry standards such as site inspections, mandatory PPE use, compliance with OSHA regulations, securing blast areas, and using blasting mats near close structures.
Is blasting dangerous to nearby structures at Design Blasting Service LLC?
No, blasting is conducted according to strict vibration and air blast limits to prevent structural damage. Ground vibrations from controlled blasts are often less intense than typical household activities like slamming doors.
How does Design Blasting Service LLC measure vibrations and noise during blasting?
They use seismographs to measure ground vibration and air blast levels at nearby structures. The data is digitally stored and coded to ensure accuracy and prevent tampering.
Who is qualified to conduct blasting operations at Design Blasting Service LLC?
Only certified and licensed blasters with comprehensive training and compliance with federal and state regulations, including permits from ATF, are authorized to conduct blasting.
What are Design Blasting Service LLC's business hours?
They are open Monday to Thursday from 8:00 AM to 5:00 PM, Friday from 8:00 AM to 4:00 PM, and closed on weekends and major holidays.
Where is Design Blasting Service LLC located?
Design Blasting Service LLC is located at 1924 Business Campus Dr #A, Murfreesboro, TN 37130, United States.
How can I schedule an appointment with Design Blasting Service LLC?
Appointments are required and can be scheduled by calling +1 615-809-2138 or visiting their website at https://designblastingservices.com/.
What nearby automotive services are available near Design Blasting Service LLC?
Near the business, customers can find Kee's Auto Repair, Murfreesboro Auto Repair, Easy Auto Murfreesboro, and Budget Brakes for automotive repair and services, making it convenient to service vehicles during appointments.
Are there fitness and martial arts centers near Design Blasting Service LLC?
Yes, nearby options include Bushido School of Karate, Bill Taylor's Bushido School of Karate, Beacon Jiu Jitsu, and Fortified Fitness, which customers might visit before or after service appointments for recreation.
What dining options are available near Design Blasting Service LLC?
Customers can enjoy meals at nearby restaurants such as Parthenon Grille, 615 District, Southern Still, Waffle House, and Shoney's, making it easy to grab food before or after visiting the business.